Give the Ford Ranger P703 / T6.2 2.0 models from 2023 onwards a lower, more road-focused stance with this matched Pedders suspension kit. It reduces ride height by approximately 40mm and combines lowered springs with TrakRyder Foam Cell damping to improve body control and steering response.
The EziFit front struts arrive assembled with their matched spring and mounting components, reducing installation time and removing the need to compress the front springs during assembly.
Who This Lowering Kit Is For
This kit is intended for Rangers used mainly on the road where a lower centre of gravity, reduced body movement and a more purposeful stance are the priority. It is not the correct option for regular off-road work, constant heavy loads or towing-focused builds.
Important: lowering does not increase payload or towing limits. Final ride height will vary with accessories and permanent vehicle weight.
Features and Benefits
- Approximately 40mm lower than standard
- Matched front and rear suspension package
- TrakRyder Foam Cell shock absorber technology
- Lowered front and rear springs
- Improved body control and road-focused handling
- Pre-assembled EziFit front struts
- Warranty: 2 years / 40,000 km / 25,000 miles, subject to Pedders’ warranty terms
What Is Included
- 2 x Pre-assembled Pedders EziFit front strut assemblies
- 2 x Pedders rear shock absorbers
- 2 x Matched rear leaf springs
- Application-specific rear spring bushes
- 4 x Rear U-bolts where specified for the kit
Kit contents should be checked against the supplied packing list before installation. Components must not be mixed between the 2.0 and 3.0 V6 applications.
Foam Cell Shock Technology
Pedders Foam Cell shock absorbers use a closed-cell foam sleeve to manage the space normally occupied by pressurised gas. This helps prevent oil aeration and cavitation, supporting more consistent damping during repeated suspension movement.
The 40mm bore provides greater oil capacity and cooling area than a smaller conventional shock, making the system well suited to pickups used on broken roads, during towing or over longer off-road sections.
Vehicle Compatibility
- Ford Ranger P703 / T6.2 2.0 models from 2023 onwards
- P703 / T6.2 generation
- Not suitable for the Ranger Raptor
- Wildtrak X and Tremor compatibility must be confirmed before ordering
Technical Specifications
- Manufacturer part number: 803681
- Vehicle: Ford Ranger P703 / T6.2 2.0 models from 2023 onwards
- Engine: 2.0
- Ride-height change: approximately 40mm lower
- Shock type: TrakRyder Foam Cell
- Shock bore: 40mm
- Kit weight: 49.68kg
- Warranty: 2 years / 40,000 km / 25,000 miles, subject to Pedders’ warranty terms
Installation and Important Information
Professional installation is recommended. The vehicle must receive a wheel alignment after the suspension work, and headlight aim should be checked. Depending on the vehicle specification, driver-assistance system calibration may also be required.
Quoted height changes are approximate and are measured against a standard vehicle. Bull bars, winches, canopies, service bodies, drawers and other permanent equipment can alter the final installed height.
A suspension upgrade does not increase the manufacturer’s plated gross vehicle weight, axle limits, payload or towing capacity. Tyre clearance and road legality must be checked separately.
Reviews
There are no reviews yet.